Engineering, 30.10.2021 01:00 avavackity
What portion of the bit is used to guide the counterbore into a hole and ensure alignment.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
What portion of the bit is used to guide the counterbore into a hole and ensure alignment....
Questions
Biology, 18.12.2020 22:20
Social Studies, 18.12.2020 22:20
Social Studies, 18.12.2020 22:20
Mathematics, 18.12.2020 22:20
Mathematics, 18.12.2020 22:20
Chemistry, 18.12.2020 22:20
Mathematics, 18.12.2020 22:20
English, 18.12.2020 22:20
Mathematics, 18.12.2020 22:20
