Engineering, 26.10.2021 14:00 roseemariehunter12

In an ionically bonded solid the force between two ions is given by where r is the distance between the ions, b and c are constants where b = 1.2x10-28 NÂ·m2 and c = 1.8x10-105 NÂ·m10 . (a) Identify the attractive and repulsive terms in the expression.
(b) Determine the ion separation in Ã… in the solid.
(c) Determine the energy in eV required to separate the ions in the solid to an infinite distance apart.
(d) Sketch E versus r curve for the solid. Label the equilibrium separation and energy minima.
(e) What physical properties would you measure in order to check your answers?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

In an ionically bonded solid the force between two ions is given by where r is the distance between...

Questions