Engineering, 24.10.2021 23:40 quissowavyquis7629

4.34 A water flow rate of 4 L/min enters the lawn sprinkler shown ss in the figure in a vertical direction. The velocity of the jets leaving the nozzles is 17 m/s relative to the sprinkler arm and inclined 30° above the horizontal. Friction in the bearing causes a torque of 0:18 N-m opposing rotation. Determine (a) the torque required to hold the sprinkler stationary, (b) the rotational speed if the torque is removed, and (c) the rotational speed if there is no torque due to the bearings. Vrel 30° R = 200 mm

4.34 A water flow rate of 4 L/min enters the lawn sprinkler shown ss in the figure in a vertical di

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

4.34 A water flow rate of 4 L/min enters the lawn sprinkler shown ss in the figure in a vertical dir...

Questions