Engineering, 17.10.2021 16:30 myla18jabbar
What's one problem with using CADD software programs?
A. Each drawing must be drawn from scratch.
B. Changes in the drawing are complicated to make
C. Software incompatibilities may prevent drawings from being widely shared.
D. Since they can't be printed they must be referenced on a computer monitor.
Answers: 3
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
What's one problem with using CADD software programs?
A. Each drawing must be drawn from scratch.<...
English, 18.06.2021 19:10
Biology, 18.06.2021 19:10
Mathematics, 18.06.2021 19:10
Mathematics, 18.06.2021 19:10
English, 18.06.2021 19:10
Mathematics, 18.06.2021 19:10
Mathematics, 18.06.2021 19:10
Computers and Technology, 18.06.2021 19:10
Mathematics, 18.06.2021 19:20
Chemistry, 18.06.2021 19:20
Geography, 18.06.2021 19:20
Mathematics, 18.06.2021 19:20
Mathematics, 18.06.2021 19:20
Mathematics, 18.06.2021 19:20