Engineering, 13.10.2021 04:00 CoolBro92
rapid mixing basin is to be designed for a 4.0 million gallon per day (MGD) conventional water treatment plant. The following criteria are provided to the designer for their design:oThe basin is to be square with a depth equal to 1.25 times the width;oThe basin should allow for a velocity gradient of 900 sec-1(at 50oF);oThe basin should have adetention time of 30 seconds. Determine:
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
You know the right answer?
rapid mixing basin is to be designed for a 4.0 million gallon per day (MGD) conventional water treat...
Questions
Computers and Technology, 15.08.2020 01:01
Mathematics, 15.08.2020 01:01
Physics, 15.08.2020 01:01
Mathematics, 15.08.2020 01:01
Chemistry, 15.08.2020 01:01
