Engineering, 29.09.2021 16:00 lnorred2
Shear strength: The cutting force and thrust force have been measured in an orthogonal cutting operation to be 301 lb and 291 lb, respectively. The rake angle = 12°, width of cut = 0.400 in, chip thickness before the cut = 0.018 in, and chip thickness ratio = 0.40. Determine (a) the shear strength of the work material and (b) the coefficient of friction in the operation.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
Shear strength: The cutting force and thrust force have been measured in an orthogonal cutting opera...
Questions
Mathematics, 24.01.2021 07:00
Law, 24.01.2021 07:00
History, 24.01.2021 07:00
Chemistry, 24.01.2021 07:00
Computers and Technology, 24.01.2021 07:10
History, 24.01.2021 07:10
Computers and Technology, 24.01.2021 07:10
Mathematics, 24.01.2021 07:10
Mathematics, 24.01.2021 07:10
Chemistry, 24.01.2021 07:10
History, 24.01.2021 07:10
