Engineering, 23.09.2021 20:00 jrich5111
Click this link to view O*NET's Work Styles section for Construction Managers. Note that common work styles are
listed toward the top, and less common work styles are listed toward the bottom. According to O*NET, what are
common work styles needed by Construction Managers? Check all that apply.
investigative
leadership
artistic
integrity
dependability
attention to detail
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Click this link to view O*NET's Work Styles section for Construction Managers. Note that common work...
Mathematics, 20.05.2021 21:20
Chemistry, 20.05.2021 21:20
Mathematics, 20.05.2021 21:20
Biology, 20.05.2021 21:20
History, 20.05.2021 21:20
Mathematics, 20.05.2021 21:20
Mathematics, 20.05.2021 21:20
Mathematics, 20.05.2021 21:20
Mathematics, 20.05.2021 21:20
Mathematics, 20.05.2021 21:20
Mathematics, 20.05.2021 21:20