The beam AB is supported by a single-shear pin connection at joint A and by a double-shear connection to member (1) at joint B. Member (1) is connected to the support at C with a double-shear pin connection. Member (1) has a cross-sectional area of 100 mm2 and a yield strength of 340 MPa. The pins at A, B, and C each have a diameter of 12 mm. and an ultimate shear strength of 270 MPa. Specifications call for a minimum factor of safety in member (1) of 1.67 with respect to its yield strength. The minimum factor of safety required for pins A, B, and C is 2.5 with respect to the pin ultimate shear strength. Determine the max. allowable distributed load w, in kN/m, that may be applied to the beam AB. Use dimensions of a