subject
Engineering, 20.09.2021 14:00 chameleonsarelife

Suppose you are planning a party, and your objective is to have an enjoyable party for all guests. An outdoor barbecue would be the best but only if the sun shines; rain would ruin the barbecue. On the other hand, you could plan an indoor party. This would be a good party, not as nice as an outdoor barbecue in the sunshine but better than a barbecue in the rain. Of course, it is always possible to forego the party altogether! Construct an influence diagram and a decision tree for this problem.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Suppose you are planning a party, and your objective is to have an enjoyable party for all guests. A...
Questions
question
Mathematics, 30.11.2020 07:50
question
English, 30.11.2020 07:50
question
Mathematics, 30.11.2020 07:50
question
Health, 30.11.2020 07:50
question
Mathematics, 30.11.2020 07:50
question
English, 30.11.2020 07:50
Questions on the website: 13722367