subject
Engineering, 26.08.2021 22:20 ibrahimrathwalp96hmj

A radial burning solid propellant rocket has a hollow cylindrical grain. The inner diameter of the grain is 30 mm and the outer diameter is 100 mm. The length of the grain is 0.5 m. The throat diameter of the nozzle is 12 mm. If the burn rate of the propellant in mm/s is given by the law r = 0.019 p^0.38, where p is the pressure in Pa, determine: a. The thrust soon after ignition (initial thrust) and the thrust at burnout
b. The maximum value of chamber pressure
c. The burning duration
d. The time taken for the chamber pressure to fall from the maximum to 10% of the maximum (tail-off).

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
A radial burning solid propellant rocket has a hollow cylindrical grain. The inner diameter of the g...
Questions
question
Computers and Technology, 18.12.2020 03:30
question
Advanced Placement (AP), 18.12.2020 03:30
question
Mathematics, 18.12.2020 03:30
question
Mathematics, 18.12.2020 03:30
Questions on the website: 13722363