Engineering, 23.08.2021 19:40 neather
Oxygen (O2) enters a well-insulated nozzle operating at steady state at 80 lbf/in^2, 11008R, 90 ft/s. At the nozzle exit, the pressure is 1 lbf/in^2 The isentropic nozzle efficiency is 85%. For the nozzle, determine the exit velocity, in m/s, and the exergy destruction rate, in Btu per lb of oxygen flowing.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
You know the right answer?
Oxygen (O2) enters a well-insulated nozzle operating at steady state at 80 lbf/in^2, 11008R, 90 ft/s...
Questions
Social Studies, 19.10.2020 06:01
Mathematics, 19.10.2020 06:01
Chemistry, 19.10.2020 06:01
Biology, 19.10.2020 06:01
Computers and Technology, 19.10.2020 06:01
Social Studies, 19.10.2020 06:01
