Engineering, 23.08.2021 08:10 hardwick744
Explain how metal is produced and turned into a product e. g. bed
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:20
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
Engineering, 06.07.2019 04:10
Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg.k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft
Answers: 1
You know the right answer?
Explain how metal is produced and turned into a product e. g. bed...
Questions
Mathematics, 28.04.2021 01:00
Mathematics, 28.04.2021 01:00
Mathematics, 28.04.2021 01:00
Mathematics, 28.04.2021 01:00
Mathematics, 28.04.2021 01:00
English, 28.04.2021 01:00
Mathematics, 28.04.2021 01:00
Mathematics, 28.04.2021 01:00
History, 28.04.2021 01:00
Health, 28.04.2021 01:00
