Uestion 10 0
On a day where the temperature is (25 C) and the pressure is
101.2 kPa, and assuming that the take-off speed is (150 miles per
hour). How much drag is produced if the coefficient of drag is
0.045? The wing area is 22 m2 and has a mass of 1250 kg.

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal