subject
Engineering, 30.07.2021 01:30 tiffxnnyyy

Consider a four-station line in which all stations consists of single machines. Station 2 has average processing times of 2 hours per job, while the remaining stations have average processing times of 1 hour per job. Answer the following, under the assumption that process times are deterministic (as in the best case). a). What are rb and To for this line?
b). How do rb and To change if a second identical machine is added to station 2? What effects will this have on performace?
c). How do rb and To change if the machine at station 2 is speeded up to have average processing times of 1 hour? What effects will this have on performance?
d). How do rb and To change if a second, identical machine is added to station 1? What effects will this have on performance?
e). How do rb and To change if the machine at station 1 is speeded up to have average processing times of 1/2 hour? What effects will this have on performance? Do your results agree or disagree with the statement "An hour saved at a nonbottleneck is a mirage (i. e., of no value)"?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Consider a four-station line in which all stations consists of single machines. Station 2 has averag...
Questions
question
Mathematics, 10.10.2020 20:01
question
Mathematics, 10.10.2020 20:01
question
Mathematics, 10.10.2020 20:01
question
Biology, 10.10.2020 20:01
Questions on the website: 13722359