Engineering, 22.07.2021 09:50 vava19

For the RL circuit, find the inductor current before t=0, after t=0 & long after t=0, equivalent R, time constant and an expression for the inductor current For the RL circuit, the switch has been closed for a long time before it opens at time t=0
a) Find the inductor current right before t=0
- b) inductor-current right after t=0
- c) inductor-current a long time after the switch is open
d) Find the equivalent resistance that the inductor sees after the switch opens?
e) Find the time constant for t>0
f) Find an expression for the indicator current i(t) for t>0

For the RL circuit, find the inductor current before t=0, after t=0 & long after t=0, equivalen

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

You know the right answer?

For the RL circuit, find the inductor current before t=0, after t=0 & long after t=0, equivalent...

Questions