subject
Engineering, 21.07.2021 23:30 hallkayleel0lozgxtq

For fully developed laminar flow through a parallel-plate channel, with a constant (and negative) pressure gradient of dP/dx, the x-direction momentum equation has the form: μ(d^2u/dy^2) = dp/dx = constant

Required:
a. Starting with this expression derive an expression for the laminar, fully developed flow profile uy) between a parallel plate channel where there is a distance A between the two plates.
b. What is the mean velocity in the channel?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
For fully developed laminar flow through a parallel-plate channel, with a constant (and negative) pr...
Questions
question
Mathematics, 14.04.2021 17:40
question
Mathematics, 14.04.2021 17:40
question
Mathematics, 14.04.2021 17:40
Questions on the website: 13722365