Engineering, 18.07.2021 14:00 meganwintergirl
The discharge from an old sewer 400 m long when flowing full has been measured as 40 l/s. The pipe diameter is 200 mm and has an estimated surface roughness of 0.6 mm. Taking the kinematic viscosity as 1.0 mm/s, calculate the head loss in the pipe. (the non dimensional friction factor -0.02; g is taken as 9.81 m/s²)​
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
The discharge from an old sewer 400 m long when flowing full has been measured as 40 l/s. The pipe d...
Questions
Physics, 08.08.2019 22:10
Physics, 08.08.2019 22:10
