subject
Engineering, 12.07.2021 16:00 Orabah

Consider a packed bed of spheres, each of diameter 2 mm, at an initial temperature of 87.5°C. Cold water at 5.0°C is poured onto the bed at 0, producing a large convection coefficient about each sphere. Determine the magnitude of the rate, in °C/s, at which an individual sphere near the top surface of the bed is cooled at 0.1, 0.25, and 1 s. The spheres have thermophysical properties similar to Pyrex.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
You know the right answer?
Consider a packed bed of spheres, each of diameter 2 mm, at an initial temperature of 87.5°C. Cold w...
Questions
Questions on the website: 13722366