Engineering, 04.07.2021 06:10 jamayeah02
: The discharge from an old sewer 400 m long when flowing full has been measured as 40 l/s. The pipe diameter is 200 mm and has an estimated surface roughness of 0.6 mm. Taking the kinematic viscosity as 1.0 mm2/s, calculate the head loss in the pipe. (the non-dimensional friction factor λ=0.02; g is taken as 9.81
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
You know the right answer?
: The discharge from an old sewer 400 m long when flowing full has been measured as 40 l/s. The pipe...
Questions
Mathematics, 29.05.2020 19:00
Mathematics, 29.05.2020 19:00
Mathematics, 29.05.2020 19:00
Chemistry, 29.05.2020 19:00
Mathematics, 29.05.2020 19:00
Mathematics, 29.05.2020 19:00
