Engineering, 24.06.2021 04:50 smarty5187
Conveyor belt drive, with active and passive pulley diameters of 200 and 600 mm. Shaft distance is 540mm. Determine the length of wire so that the shaft distance is the least deviation and the gear ratio of the transmission
Answers: 3
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
Conveyor belt drive, with active and passive pulley diameters of 200 and 600 mm. Shaft distance is 5...
History, 02.03.2021 19:00
Mathematics, 02.03.2021 19:00
Mathematics, 02.03.2021 19:00
Mathematics, 02.03.2021 19:00
Mathematics, 02.03.2021 19:00
Mathematics, 02.03.2021 19:00
Mathematics, 02.03.2021 19:00
Chemistry, 02.03.2021 19:00
History, 02.03.2021 19:00
English, 02.03.2021 19:00
Mathematics, 02.03.2021 19:00
History, 02.03.2021 19:00