Engineering, 15.06.2021 03:00 dudedan05
The view factor for radiation emitted by surface 1 to surface 2 was calculated to be 0.4. The working area of surface 1 is 0.01 m2, the working area of surface 2 is 0.04 m2. What is the view factor for radiation emitted by surface 2 to surface 1?
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
The view factor for radiation emitted by surface 1 to surface 2 was calculated to be 0.4. The workin...
Biology, 16.02.2021 09:40
Chemistry, 16.02.2021 09:40
Mathematics, 16.02.2021 09:40
History, 16.02.2021 09:40
Advanced Placement (AP), 16.02.2021 09:40
English, 16.02.2021 09:40
Mathematics, 16.02.2021 09:50