Engineering, 14.06.2021 20:00 BeautyxQueen
Develop a VBE program to test the A/D, D/A, and digital I/O functions on a data acquisition card. For testing the A/D and D/A, the program should allow the user to specify which channel to test. In addition, the program should provide three testing modes: single reading from or writing to a particular channel, repeated testing of a particular channel (for reading only), and continuous testing of a combination of an A/D and D/A channels (for example reading a sine wave through the A/D and sending it back through the D/A). In the second testing mode, the program should allow the user to specify the number of times the individual reading need to be taken, and should display the average reading and the range of the readings taken during the test. For testing the digital I/O port, the program should be able to send a value (0 or 1) to any one of the 8 bits on the digital output port without affecting the current values on the other remaining 7 bits. For testing the digital input port, the program should be able to read the input value on any one of 8 bits. (Note: This problem assumes the availability of a data-acquisition card with a software library for accessing the A/D, the D/A, and the parallel port.)
Answers: 2
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Develop a VBE program to test the A/D, D/A, and digital I/O functions on a data acquisition card. Fo...
Mathematics, 08.10.2021 07:30
Mathematics, 08.10.2021 07:30
Mathematics, 08.10.2021 07:30
History, 08.10.2021 07:30
Mathematics, 08.10.2021 07:30
History, 08.10.2021 07:30
History, 08.10.2021 07:30
Geography, 08.10.2021 07:30
History, 08.10.2021 07:30
Mathematics, 08.10.2021 07:30