Engineering, 14.06.2021 16:50 iajiborode8944

1. A 220 V, 21 A, 1000 rpm dc shunt motor has an armature resistance of 0.05 ohm and a field resistance of 220 ohms. The magnetization curve for the machine is given by the following table: Field current 0.2 0.4 0.6 0.8 1.0 1.2 1.4 (A) EMF at 1000 rpm (V) 50 100 150 190 219 235 245 Plot the speed-torque curve for the motor when ( a) no external resistances are included, (b) a resistance of 0.05 ohm is connected in series with the armature, and (c) a resistance of 110 ohms is included in series with the field winding

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

You know the right answer?

1. A 220 V, 21 A, 1000 rpm dc shunt motor has an armature resistance of 0.05 ohm and a field resista...

Questions