subject
Engineering, 11.06.2021 08:20 suewignall

A track dozer cost $165,500 to purchase. FOG and minor maintenance are estimated at $35.00 per operating hour. A major engine repair costing $26,000 will be required after 7.200 hr The expected resale price (salvage value) 21.0% of the original purchase price. The machine should last 10,800 hrs. How much should the owner of the machine charge per hour of use, if it is expected that the machine will operate 1,800 hours per year? The company's cost of capital rate is 7.30% A track dozer cost $165,500 to purchase. Fuel, oil, grease, and minor maintenances (usage) are estimated to cost $35.00 per operating hour. A major engine repair costing $26,000 will probably be required after 7,200 hr of use. The expected release price (salvage value) is 21% of the original purchase price. The machine is expected to have a useful life of 10,800 hr. The machine is expected to operate 1,800 hr per year. The company's cost of capital rate is 7.3%. a) Calculate the annual ownership cost. b) Calculate the annual usage cost. c) Calculate the annual repairs cost. d) Calculate the annual selvage value. e) Calculate the annual total cost. f) Calculate the hourly total cost.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
You know the right answer?
A track dozer cost $165,500 to purchase. FOG and minor maintenance are estimated at $35.00 per opera...
Questions
question
Chemistry, 07.04.2020 23:34
question
Mathematics, 07.04.2020 23:34
Questions on the website: 13722363