Engineering, 10.06.2021 22:30 sonyav732

The equilibrium electron concentration is given by the product of density of states and probability function, n(E) = gc(E)*F(E) where gc(E) and F(E) are the conduction band density of states and Fermi-Dirac probability function, respectively. Using the full expression of Fermi-Dirac function (NOT w/ Maxwell-Boltzmann function), calculate the energy relative to the conduction band edge, E - Ec, at which the electron concentration becomes maximum. This semiconductor has a bandgap of 1.124 eV and the temperature is 300 K. Further assume that the Fermi level, EFâ€‹ is located precisely at the conduction band, i. e. EC - EF = 0.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 06.07.2019 04:20

Steam enters a turbine at steady state at 2 mpa, 360°c with a velocity of 100 m/s. saturated vapor exits at 0.1 mpa and a velocity of 50 m/s. the elevation of the inlet is 3 m higher than at the exit. the mass flow rate of the steam is 15 kg/s, and the power developed is 7 mw. let g 9.81 m/s^2. determine: a)-the area at the inlet, in m^2 b)-the rate of heat transfer between the turbine and surroundings, in kw c)-draw a p-v diagram for this process.

Answers: 1

Answer

You know the right answer?

The equilibrium electron concentration is given by the product of density of states and probability...

Questions