Engineering, 07.06.2021 16:40 nialphonsa

A Small-sized Wind Turbine is schematically shown in Fig (a), and is delivering a maximum rated power of ( 50 KW ). This Wind Turbine is using " A Single-Stage- Spur- gearbox " to speed up the main Drive shaft speed from 20 rpm to 1400 rpm ( see Fig (b) ). In order to absorb shock loads , such gear box is suspended in space by two torque arms -as shown in Fig ( c ); which is attached to the turbine housing by a Bolted Joint, of 6 equally spaced Hexagonal bolts. requirements:

1- The Standard Design Procedure

2-Design of Torque arm,

3-Design of the Bolted Joint

4-Design of the used Spur gear Pair

5-Design of main Input Shaft together with its KEY

6-Select the Right Deep Groove Ball bearings; which are supporting the main input Shaft, and Finally

7-The Configuration of the Main Input Shaft (Product Concept, DFM, DFA, Dimensions, Fits, and Tolerances for mating parts)

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

A Small-sized Wind Turbine is schematically shown in Fig (a), and is delivering a maximum rated powe...

Questions