Engineering, 06.06.2021 16:20 sjackson0625p8w1a0
A core sample brought to the laboratory for compositional analysis, where 80 g of the sample is placed in a mercury pycnometer and the volume of gas found is 0.53 cc. A piece of the same sample, weighing 120 g is placed in a retorte, where the water and oil volume is measured to 2.8 cc and 4.4 cc, respectively. A third piece of the sample, weighing 90 g is placed in a pycnometer and the bulk volume is measured to be 37.4 cc.(API oil = 40Ω). Calculate the porosity, water saturation, oil saturation, gas saturation and lithology of the core sample.β
Answers: 2
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
A core sample brought to the laboratory for compositional analysis, where 80 g of the sample is plac...
English, 20.09.2020 16:01
Social Studies, 20.09.2020 16:01
Social Studies, 20.09.2020 16:01
English, 20.09.2020 16:01
English, 20.09.2020 16:01
Computers and Technology, 20.09.2020 16:01
Computers and Technology, 20.09.2020 16:01
English, 20.09.2020 16:01