subject
Engineering, 04.06.2021 01:30 alyssa337

A wastewater treatment plant treats 20 MGD of wastewater containing 950 mg/L of suspended solids in a primary clarifier that has a 20% suspended solids removal efficiency. The rate of sludge collection, the flow rate out the bottom of the clarifier, is 0.08 MGD. a) What is the solids concentration (in mg/L) in the sludge leaving the clarifier?
b) What mass of solids (in kg/y) is removed annually by the primary clarifier?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
You know the right answer?
A wastewater treatment plant treats 20 MGD of wastewater containing 950 mg/L of suspended solids in...
Questions
question
Mathematics, 03.04.2020 19:32
Questions on the website: 13722367