Engineering, 03.06.2021 20:20 tevaughn06

Traceroute program is used to find the network paths and round-trip delays between source host and destination host. Open your command prompt running on a Linux system and run the traceroute program at command prompt using the following command:
traceroute < destination – host address>
Example: traceroute www. cs. test. uni. edu
The output of traceroute program contains 6 columns.
1st column: the number of router along the path or route
2nd column: name of the router
3rd column: IP address of the router
4th column: round-trip delay (1st experiment)
5th column: round-trip delay (2nd experiment)
6th column: round-trip delay (3rd experiment)

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

You know the right answer?

Traceroute program is used to find the network paths and round-trip delays between source host and d...

Questions