subject
Engineering, 02.06.2021 18:00 ijinaeiaujah8165

Which option identifies the best way to reduce the environmental impact in the following scenario? Sheryl has been assessing a factory where cheese is made and packaged. She has determined that the
product's packaging is the component that causes the highest environmental impact.
Sheryl should implement steps to create a cheese that does not need to be packaged.
0 Sheryl should implement steps to educate the factory personnel on the subject of conservation.
O Sheryl should implement steps to optimize the packaging in an eco-friendly manner.
O Sheryl should implement steps to reduce costs in the packaging department.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 06.07.2019 05:20
An ideal gas expands in an adiabatic turbine from 1200 k and 900 kpa to 800 k. determine the turbine inlet volume flow rate of the gas, in m'/s, required to produce turbine work output at the rate of 650 kw. the average values of the specific heats for this gas over the temperature range and the gas constant are op 1.13 kj/kg.k, v 0.83 kj/kg k, and r 0.30 kj/kg k
Answers: 2
You know the right answer?
Which option identifies the best way to reduce the environmental impact in the following scenario?...
Questions
question
Mathematics, 23.07.2019 00:30
question
Mathematics, 23.07.2019 00:30
question
Mathematics, 23.07.2019 00:30
question
Mathematics, 23.07.2019 00:30
question
Mathematics, 23.07.2019 00:30
Questions on the website: 13722363