Engineering, 29.05.2021 23:40 DiamondSharp9860
Technician A says that camshaft rotation must be in the same direction as crankshaft rotation. Technician B says that camshaft rotation may be opposite to crankshaft rotation. Who is right
Answers: 1
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500ยฐc with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Technician A says that camshaft rotation must be in the same direction as crankshaft rotation. Techn...
Biology, 09.12.2020 20:20
Mathematics, 09.12.2020 20:20
Mathematics, 09.12.2020 20:20
Mathematics, 09.12.2020 20:20
History, 09.12.2020 20:20
Mathematics, 09.12.2020 20:20
German, 09.12.2020 20:20
History, 09.12.2020 20:20
Mathematics, 09.12.2020 20:20
Mathematics, 09.12.2020 20:20
Spanish, 09.12.2020 20:20
Arts, 09.12.2020 20:20