Engineering, 28.05.2021 17:30 haileysolis5
The mass fraction of eutectoid cementite in a hypoeutectoid iron-carbon alloy (just below its eutectoid temperature) is 0.109. On the basis of this information, determine the composition of the alloy. If it is not possible to determine the composition from the information provided, enter 0.
Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
The mass fraction of eutectoid cementite in a hypoeutectoid iron-carbon alloy (just below its eutect...
English, 20.11.2020 19:30
Mathematics, 20.11.2020 19:30
Mathematics, 20.11.2020 19:30
English, 20.11.2020 19:30
Physics, 20.11.2020 19:30
Mathematics, 20.11.2020 19:30
Biology, 20.11.2020 19:30
Mathematics, 20.11.2020 19:30
Spanish, 20.11.2020 19:30
Mathematics, 20.11.2020 19:30
Mathematics, 20.11.2020 19:30
Mathematics, 20.11.2020 19:30