Engineering, 26.05.2021 14:00 Mikec123
This question is designed to check your understanding of code for LCD display shared
earlier with students.
Here is the Pseudocode for what needs to be displayed on the screen.
Display your full name.
Delay of 0.5 seconds
Display your Registration number.
Delay of 1 seconds
Display βMBSD Midterm 21β
Delay of 1.5 seconds
Display all characters of your First name one by one with a delay equal to the ASCII value of the
character display. Also display the decimal value of the ASCII character along with the character
itself. The format to display the information is given below.
Here is an example.
Display βM: 77β
Delay (77 ms)
Display βA: 65β
Delay (65 ms)
Display βL: 76β
Delay (76 ms)
Display βI: 73β
Delay (73 ms)
Display βK: 75β
Delay (75 ms)
Answers: 2
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
This question is designed to check your understanding of code for LCD display shared
earlier with s...
English, 13.03.2020 19:54
History, 13.03.2020 19:54
Mathematics, 13.03.2020 19:54
Mathematics, 13.03.2020 19:55
History, 13.03.2020 19:55