subject
Engineering, 25.05.2021 22:20 juliannabartra

an inclined manometer is connected to a pitor tube to measure the velocity at the center of a circular duct. If the inclined manometer measured 2.3 inches of water and the minimum division on the manometer scale is 0.04 inches of water. What is the uncertainty of the velocty at the center of the pipe in m/s

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
an inclined manometer is connected to a pitor tube to measure the velocity at the center of a circul...
Questions
question
Mathematics, 21.06.2020 22:57
question
Computers and Technology, 21.06.2020 22:57
question
Mathematics, 21.06.2020 22:57
Questions on the website: 13722363