Engineering, 25.05.2021 01:30 angelica3752

A 0.1 kg sample of a gas is introduced into the space A, which is a cylinder with a piston C. The cylinder is immersed in an air bath B. The walls of the cylinder conduct heat, but the walls of the bath are insulated. The bath contains 0.05 kg of air. At the start of the process the temperature in A and B is uniform. When a force of 540 kg is applied to D, the piston moves slowly downward a distance of 9 cm. At the end of the process and when the temperatures have again become uniform, the temperature in the air bath has risen by 5.6 °C. Find the change in the internal energy of sample A in Joules. The average heat capacity of air for this experiment is 0.24 kcal/kg.°C.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

You know the right answer?

A 0.1 kg sample of a gas is introduced into the space A, which is a cylinder with a piston C. The cy...

Questions