Design a rod that will have an interference fit so that the allowance (the maximum interference) is 0.010 with the center hole in the Rocker Arm

and the tolerance on the rod diameter is .002. Sketch a section view of

your rod design. Be sure to specify the tolerance in the diameter

dimension of your design.

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when