Engineering, 22.05.2021 04:40 amelvin41
As an employee, who is supposed to provide training on the chemicals you are handling or come in contact with at work?
Select the best option.
Distributor
Government
Manufacturer
Employer
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
As an employee, who is supposed to provide training on the chemicals you are handling or come in con...
Physics, 21.01.2020 07:31
Mathematics, 21.01.2020 07:31
Physics, 21.01.2020 07:31
History, 21.01.2020 07:31
Biology, 21.01.2020 07:31
Biology, 21.01.2020 07:31
Chemistry, 21.01.2020 07:31
Physics, 21.01.2020 07:31
Mathematics, 21.01.2020 07:31
Physics, 21.01.2020 07:31
History, 21.01.2020 07:31
History, 21.01.2020 07:31
Mathematics, 21.01.2020 07:31