subject
Engineering, 20.05.2021 20:10 diablo666

Look this will probably get reported for no reason whatsoever but i know there are a lot of people on this website looking for a gf or bf so if you are instead of using to look use this link to pad let https://pad let. com/xhennhj/w2z9t9c66pme8vrq

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
question
Engineering, 06.07.2019 03:10
How to convert a friction to decimal ?
Answers: 1
You know the right answer?
Look this will probably get reported for no reason whatsoever but i know there are a lot of people o...
Questions
question
Mathematics, 19.09.2019 00:30
question
Chemistry, 19.09.2019 00:30
Questions on the website: 13722363