Engineering, 19.05.2021 19:10 postolachiveaceslav9

One kilogram of air as an ideal gas executes a Carnot power cycle having a thermal efficiency of 50%. The heat transfer to the air during the isothermal expansion is 50 kJ. At the end of the isothermal expansion, the pressure is 574 kPa and the volume is 0.3 m3. Determine (a) the maximum and minimum temperatures for the cycle in K;
(b) the pressure and volume at the beginning of the isothermal expansion in bar and m3 respectively;
(c) the work and heat transfer for each of the four processes in kJ.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

You know the right answer?

One kilogram of air as an ideal gas executes a Carnot power cycle having a thermal efficiency of 50%...

Questions