Engineering, 19.05.2021 18:30 leximae2186

One piece is cylindrical with a hemispherical hat (the flat face of hemisphere rests flush on top of the flat face of the cylinder). The diameter of the cylinder and hemisphere are identical at 2r inches, and the height of the cylinder is 2r inches. The second piece is a cube with a mountedcylinderon it such that one of the flat facesof the cylinder is resting on the top face of the cube. The four edges of the cube are tangential to the circle of the cylinder resting on it. The side of a cube has a length of 2r inches and the height of the cylinder is r inches. The third piece is a cube with a mounted hemisphere on it such that the flat face of the hemisphere is resting on the top face of the cube. The four edges of the cube are tangential to thecircle of the hemisphere resting on it. The side of a cube has a length of 2r inches and the radius of the sphere is r inches. Required:
Which piece will solidify the fastest and which piece the slowest?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

One piece is cylindrical with a hemispherical hat (the flat face of hemisphere rests flush on top of...

Questions