Engineering, 14.05.2021 02:30 vleverett444

A hydraulic jump is a common phenomenon in fluid dynamics characterized by a sudden change in depth of a liquid layer as it flows in an open channel. This is something you may have observed during recent flooding events throughout Texas. For a more detailed explanation check out this video. Consider a flow of water through a 10-m-wide open channel at a volumetric flow rate of 30 m3 /s. The height of the water flow immediately before the jump can be found by dividing the channel width by the "123" digits of your abc123. a) List the height of the water flow immediately before the hydraulic jump.
b) Find the velocity of the water immediately before the hydraulic jump.
c) If the velocity of the water immediately after the hydraulic jump is 5× the value found for part (b), what must be the height of the water immediately after the hydraulic jump?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

You know the right answer?

A hydraulic jump is a common phenomenon in fluid dynamics characterized by a sudden change in depth...

Questions