subject
Engineering, 13.05.2021 19:00 jennaranelli05

Given the open-loop transfer function of a unit-feedback system: G(s) = K/s(s + 1)(s2 + 4s + 5)
For the related (P-controlled) closed-loop system:
a) Make a sketch of the branches of the loci on the real axis, as the gain K varies from zero to infinity.
b) Find the closed loop system asymptotes as K??:
-Determine the angles that they make with the real axis
-Determine the location where the asymptotes cross the real axis, i. e.: the root-locus centroid
c) Which of the following poles corresponds to the breakaway (or break-in) point of the loci on the real axis?
a. - s=-1.57
b. - s=-0.895
c. - s=-0.393
d. - s=-0.111
d) Determine the range of K values for which the closed loop system is absolutely stable.
e) Determine (if any) the frequency (in rad/sec) at which the system becomes unstable.
f) Find the departure angle from the complex-conjugate open-loop poles.
g) Sketch the root-locus plot, clearly indicating its most significant characteristics"
-Branches on the real-axis
-Asymptotes and their centroid
-Breakaway and/or break-in point(s)
-Loci crossings on the imaginary axis (if any)
-The corresponding gains at the most significant loci locations, i. e.: at the breakaway, break-in points at the real axis and at the imaginary axis crossings (if any)
-Departure angles from complex-conjugate open-loop poles
h) For what value of gain K, the closed loop system will have a critical dampint condition (?=1)?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
Given the open-loop transfer function of a unit-feedback system: G(s) = K/s(s + 1)(s2 + 4s + 5)
Questions
question
Mathematics, 18.11.2020 18:30
question
History, 18.11.2020 18:30
question
Mathematics, 18.11.2020 18:30
question
Mathematics, 18.11.2020 18:30
Questions on the website: 13722365