Engineering, 03.05.2021 15:00 DroctorWellsfan

In the search for more environmentally friendly design, paper cups have replaced Styrofoam cups in most fast-food restaurants. These cups are less effective insulators, and the paper cups often get too hot for the hand. A design team is in search of a better disposable coffee cup. The designs to be evaluated are: (a) a standard Styrofoam cup, (b) a rigid injection-molded cup with a handle, (c) a paper cup with a cardboard sleeve, (d) a paper cup with a pull-out handle, and (e) a paper cup with a cellular wall. These design concepts are to be evaluated with the Styrofoam cup as the datum.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

Answer

You know the right answer?

In the search for more environmentally friendly design, paper cups have replaced Styrofoam cups in m...

Questions