Engineering, 01.05.2021 01:00 calebabaltimore
(a) Assuming the chip to have a negligible effect on flow over the pin, what is the average convection coefficient for the surface of the pin? (b) Neglecting radiation and assuming the convection coefficient at the pin tip to equal that calculated in part (a), determine the pin heat transfer rate. (c) Neglecting radiation and assuming the convection coefficient at the exposed chip surface to equal that calculated in part (a), determine the total rate of heat transfer from the chip.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
(a) Assuming the chip to have a negligible effect on flow over the pin, what is the average convectio...
Social Studies, 12.12.2020 21:30
Advanced Placement (AP), 12.12.2020 21:30
Mathematics, 12.12.2020 21:30
English, 12.12.2020 21:30
English, 12.12.2020 21:30
Mathematics, 12.12.2020 21:30
Social Studies, 12.12.2020 21:30
Mathematics, 12.12.2020 21:30
Social Studies, 12.12.2020 21:30
History, 12.12.2020 21:30
Mathematics, 12.12.2020 21:30
Mathematics, 12.12.2020 21:30
English, 12.12.2020 21:40
Mathematics, 12.12.2020 21:40