Engineering, 30.04.2021 23:40 daisa02
A small tube, 0.5 mm in diameter is connected to a pressure transducer through a volume of 3 cm3 . The tube has a length of 10 cm. Air at 1 atm (101,325 Pa), and 300 K is the pressure-transmitting fluid. (a) Calculate the natural frequency for this system and the damping ratio. (b) Calculate the attenuation of a 100 Hz pressure signal. (c) Would water be a better pressure-transmitting fluid
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
A small tube, 0.5 mm in diameter is connected to a pressure transducer through a volume of 3 cm3 . T...
Questions
Mathematics, 16.04.2021 17:50
Mathematics, 16.04.2021 18:00
Mathematics, 16.04.2021 18:00
Mathematics, 16.04.2021 18:00
Mathematics, 16.04.2021 18:00
