In Figure (8) a cable is attached to the structure at E, passes around the 0.8 m diameter frictionless pulley at A, and then is attached to a 1000 N Weight W. Determine all forces acting on member ABCD.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.