The Metal piece places around the edges of facia and rake board is called
Drip Edge
Felt Edg...
Engineering, 27.04.2021 21:30 natalie6089
The Metal piece places around the edges of facia and rake board is called
Drip Edge
Felt Edge
Facia strip
Roof edging
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Mathematics, 17.01.2021 05:00
History, 17.01.2021 05:00
Mathematics, 17.01.2021 05:00
Mathematics, 17.01.2021 05:00
History, 17.01.2021 05:00
Physics, 17.01.2021 05:00
Health, 17.01.2021 05:00
Health, 17.01.2021 05:00
Mathematics, 17.01.2021 05:00