subject
Engineering, 27.04.2021 15:10 kittylover613

It is desired to filter a cell broth at a rate or 2,000 L/h on a rotary vacuum at a vacuum pressure of 70 kPa. The cycle time for the drum is 60 s and the cake formation time is 15 seconds. The broth to be filtered has a viscosity of 2.0 cp and a cake solids (dry basis) per volume of filtrate of 10 g/L. From laboratory tests, the specific cake resistance has been determined to be 9x1010 cm/g. Determine the area of the filter that is required. The resistance of the filter medium can be neglected.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
You know the right answer?
It is desired to filter a cell broth at a rate or 2,000 L/h on a rotary vacuum at a vacuum pressure...
Questions
question
Mathematics, 08.04.2021 07:50
Questions on the website: 13722363