subject
Engineering, 25.04.2021 04:30 ehhshsh

BEV has the following requirements: eight years of operation at an average of 24,000 km per year, averaged out over 365 days per year. Assume an average battery output of 204 Wh/km and a rated cell voltage of 3.6 V, a capacity of 3.4 Ah, and a lifetime index of L 1. i) Determine the BOL kWh storage. ii) How many cells do you need and what is the BOL range? iii) What is the BOL storage and how many cells are required for a larger pack in order to increase the BOL range to 425 km? iv) How many parallel strings are required if the pack has 96 cells in series? v) What is the battery pack mass, assuming a battery with a pack density of 150 Wh/kg? vì) If the peak power is 325 kW, what is the P/E ratio of the battery for the lar- ger pack? [Ans. 39.16 kWh, 3,200, 192 km, 86.7 kWh, 7,083, 74, 578 kg, 3.5] 3.2 A PHEV battery pack has the following requirements: ten years of operation at an average of 50 km per day, an average battery output of 5 km/kWh, and a 14.6 Ah cell with a rated voltage of 3.65 V and an index of L = 3. i) What is the BOL battery pack energy storage? ii) What is the total number of cells required, to the nearest factor of 3? iii) What is the pack voltage if the pack is in series-parallel with three cells in parallel? iv) If the peak power is 110 kW, what is the P/E ratio of the battery? v) What is the battery pack mass, assuming a with a pack density of 150 Wh/kg? [Ans. 15.4 kWh, 288 (to nearest multiple of 3), 350 V, 7.1, 103 kg]

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
You know the right answer?
BEV has the following requirements: eight years of operation at an average of 24,000 km per year, av...
Questions
question
History, 09.10.2019 08:30
question
Mathematics, 09.10.2019 08:30
question
Biology, 09.10.2019 08:30
Questions on the website: 13722367