Engineering, 24.04.2021 01:00 Leonorareed5145
Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal bending moment M_y=24 Nm, and an internal shear force V= 10 kN. All loads act in the directions shown in the figure below. The cross-section has a diameter, d=69 mm.
Given these internal loads in the cross-section, calculate the stresses at point B.
Determine the normal stress, alphaB, and shear stress tauB, at point B in MPa.
ans: SigmaB = 0.7441, TauB = -28.7895
I need help getting to the answer. Thank you.
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Consider a circular cross-section which experiences an internal torsional load T=17 Nm, an internal...
Social Studies, 16.10.2020 04:01
Mathematics, 16.10.2020 04:01
Law, 16.10.2020 04:01
Social Studies, 16.10.2020 04:01
Health, 16.10.2020 04:01
Mathematics, 16.10.2020 04:01
History, 16.10.2020 04:01
Biology, 16.10.2020 04:01